Pause the cycle and inspect the external water supply before trying the washer again.
Plain-language answer
What the IE code means
The washer did not fill to the expected water level within the allowed time. LG identifies IE as a water inlet or no-water-supply error.
This code points to a problem category. It does not prove that a specific internal part has failed.
Do these in order
Safe checks to try
- 1
Open the water faucets fully
Confirm the connected hot and cold supply faucets are open.
What to look for: A recently moved or serviced washer may have a closed faucet. - 2
Inspect the inlet hoses
Check the visible hose path for sharp bends, pinching, or twisting.
What to look for: Water should be able to flow without a restricted section. - 3
Confirm the hose connections
Make sure the hot and cold hoses are connected to the intended inlets.
What to look for: Incorrect connections can affect filling on some cycles. - 4
Retry one cycle
After correcting an external supply issue, run a short cycle.
What to look for: A returning IE code needs model-specific support or service.
Stop and arrange service when
Stop if there is a leak, a damaged hose or valve, frozen plumbing you cannot address safely, water near electrical components, or the code returns after the external checks.
Source provenance
Official sources
These links support the code meaning and safe first checks. Use the manual for your exact model when instructions differ.
See something unclear or incorrect?
Send the page link, appliance model, and the detail that needs review.